Install McPOS in windows for new computer

Guyson

Step 1. Create two partitions from [C:\]

i.   (do this only for 64bits windows)

Run C:\Windows\SysWOW64\odbcad32.exe

in 64bits windows, odbcad32.exe

System DNS -> Add -> Adaptive Server Anywhere 8.0

configure... :  ODBC ->Datasource name: mcpos

Database -> Server name: mcpos

Network-> unchecked "Shared memory"

Network -> check TCP/IP

ii. Turn off Windows update

iii.    In windows OS, open Disk Management by :

[Start button] -> Control Panel -> System and Security -> AdministrativeTools -> Computer Management -> Disk Management

iv. Select and right click [c:\] to partition it into two drives; by selecting“Shrink Volume” from the drop-down list; shrink about 30 GB.

v.   Format the new partition into [D:\] with NTFS format, and name [D:\] as“Data”

vi. Now the computer with have both [C:\] and Data[D:\].

Step 2. Rename the computer name to “c1”

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

i.   Control Panel -> System and Security -> System -> Change settings-> Change

ii. Change the name in the “Computer name area”

iii.    [OK] & [Apply]

Step 3. Create two user account: “admin” & “user”

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

i.   Control Panel -> User Accounts and Family Safety -> User Accounts ->Manage Accounts -> Create a new account (create as administrator)

ii. Create “admin” account first -> logout current account(“User”)->  login “admin” account -> delete“User” account; delete all files -> Create “user” account -> logout“admin” account -> login “user” account before going to Step 4.

Information needed to create “admin” and“user” account shown as below:

Account 1	Account 2
New account name: admin    New Password: adsadsads    (create as administrator)	New account name: user    New Password: ads    (create as administrator)

Step 4. Setup windows to log in as “user” automatically without password

i.   Press “window key + R”

ii. type “control userpasswords2”and click [OK]

iii.    Check “Users must enter a user name and password touse this computer.” check box, -> Select the“user”account.

iv. Uncheck the “Users must enter a user name andpassword to use this computer.” check box, and thenclick [Apply].

v.   Upon the [Apply] is clicked, you will be prompted to enter the informationfor the account to log in automatically.

Enter the follow information

User name: user    Password: ads    Confirm Password: ads

Step 5. Installation for MCPOS

i.   From the installation flash drive, in the mcpos installation folder, copy “mis”folderinto [c:\]

ii. Uncheck “read-only” for “C:\mis”folder and “C:\mis\update” folder

iii.    In mcpos installation folder, copy “backup folder”folder & “data”folderinto [D:\]

iv. Uncheck “read-only” for “D:\backup folder”folder and “D:\data” folder

v.   Share “C:\mis”, “C:\mis\update”, D:\backup folder”, “D:\data” by :

Share folder by following path

right click on folder -> left click property -> Sharing ->  advanced sharing    check 'share this folder' -> permissions -> Add -> Advance ->  Find Now -> select 'Users' on    bottom -> OK -> check “full control” -> apply -> apply

Step 6. Setup Database

i.   From the installation flash drive,extract“c:\mis\Sybase” to C:\programfiles, run mcpos.reg in c:\mis\ to register mcpos db server

ii. Extract most recent mcpos version (e.g. 3.3.4.4.g) to c:\mis\update. Click “C:\mis\update.bat”;then right click “c:\mis\mcpos\reg.bat”and run as administrator

iii.     At desktop, create shortcut for “mcpos.exe”,“mcpos9DB”, “update.bat”, “updateClient.bat”

iv. Run “mcpos9DB-shortcut”-> then run “mcpos-shortcut”-> write down serial number -> ask for license number (Send serial numberto boss for license number)

Step 7. Installation for Printers

i.   Install 7 printer driver for receipt printer.

ii. Configure 7 printers’ properties separately by following processes:

iii.    In “Start” menu -> Devices and Printers -> Right click on printer andselect printer properties -> Rename the printer name in “General” andcreate/select a port in “Ports”for the printer

For example:

Printer name: receipt    Port: Lpt1    Description: Printer Port	Printer name: drawer    Port: usb001    Description: Virtual Printer port for  usb	Printer name: kitchen    Port: 192.168.1.151    Description: Standard TCP/IP Port
Printer name: appetizer    Port: 192.168.1.152    Description: Standard TCP/IP Port	Printer name: packer    Port: 192.168.1.153    Description: Standard TCP/IP Port	Printer name: sushi    Port: 192.168.1.154    Description: Standard TCP/IP Port
Printer name: hibachi    Port: 192.168.1.155    Description: Standard TCP/IP Port

iv. Still in each printer properties -> Advanced -> Printing Defaults-> Paper Quality -> Tray Selection -> perform follow action accordingto different printer name.

Printer name: receipt    Paper Source: Report [Cut]    Media: No Cash Drawer    Advanced : Output Bin: [Report] Beep  After Printing	Printer name: drawer    Paper Source: No Cut[No Feed]    Media: No Cash Drawer    Advanced : Output Bin: No Beep	Printer name: kitchen    Paper Source: Report [Cut]    Media: No Cash Drawer    Advanced : Output Bin: [Report] Beep  After Printing
Printer name: appetizer    Paper Source: Report [Cut]    Media: No Cash Drawer    Advanced : Output Bin: [Report] Beep  After Printing	Printer name: packer    Paper Source: Report [Cut]    Media: No Cash Drawer    Advanced : Output Bin: [Report] Beep  After Printing	Printer name: sushi    Paper Source: Report [Cut]    Media: No Cash Drawer    Advanced : Output Bin: [Report] Beep  After Printing
Printer name: hibachi    Paper Source: Report [Cut]    Media: No Cash Drawer    Advanced : Output Bin: [Report] Beep  After Printing

v.   (This step can be skip and can be done after Step 12.)

On the printer, setup printerIP for each printer (click here to see instruction); not on the computer.

Step 8. Setup for Credit Card machine

i.   Install PCCharge payment server (into D:\Pcc\Active-Charge)

ii. Install PCCharge payment client(default path)

iii.    Share “D:\Pcc\Active-Charge” folder by same sharing method in step 5.

Step 10. Install software and create shortcut for daily usage

i.   Install Teamviewer, WinRAR, Google Chrome, King Office and Adobe Reader

ii. Create “backup” folder on desktop

iii.    Move shortcuts of “mcpos9DB, PCCharge payment server, PCCharge

client, Google Chrome” into it

Step 11. Setup daily restart for Computer

i.  Perform following steps at desktop:

ii. Press “Start menu” button -> All Programs -> Accessories -> SystemTools -> Task Scheduler -> “Create Basic Task” -> Type in “Reboot” inthe Name section -> Next -> Daily -> Next ->Recur every ‘1’ days-> Next -> Start a program:

Program/Script: C:\Windows\System32\shutdown.exe

Add Arguments: -r -t 30

iii.   Run TeamViewer shortcut on desktop-> Extras -> Options -> check check-box “Start TeamViewer withWindows” -> set password to “adsadsads”

Step 12. Setup for printers in MCPOS after obtained the MCPOS licensenumber

i.   Copy the shortcut of mcpos9DB from desktop’s “backup” folder into windowmenu “Startup” folder

ii. Restart computer

iii.    Double click shortcut of “mcpos.exe” at desktop first time.

iv.EnterMCPOS license number