设置display pole

wen

正常来讲，把display pole插入电脑对应接口后，开机会有东西显示，说明连接成功。


*对于FEC的All in one，对应的连接后还需要开机，按 delete进入进入BIOS，进行如下设置：

BIOS --->Advanced --->IT8786E Super IO Configuration --->Serial Port 6 Configuration --->RI# PIN Voltage Function ---> +12V


logiccontrols的USB Pole, 需要先安装驱动获得虚拟Com Port 端口号码.
https://logiccontrols.com/product-drivers/


设置完后按F10保存，重启电脑，FEC的display pole就会有东西显示。


接下来进入系统，然后进入MCPOS ---> local setup 进行如下设置：


for Apexa com display
[pole]
port=com1
polebrand=advanced
mode=9600,n,8,1


for FEC com display
[pole]
port=com6
polebrand=advanced
mode=9600,n,8,1


for Posbank buildin display
[pole]
port=com1
polebrand=EPSON
mode=9600,n,8,1


for separate pole display
[pole]
port=com1
polebrand=logiccontrol
mode=9600,n,8,1



for All in One Touch Screen from China
[pole]
port=com2
polebrand=EPSON
mode=9600,n,8,1